Ricambi e Accessori
Laser Co2 50W
DPS Controller MC-BOARD.pdf
Manual of Laser Cutting Software 2.pdf
-
Potenza in uscita(W):50
- Lunghezza D'onda:10600nm
-
Lunghezza totale(mm):850
- Diametro (mm) :50
- Peso (Gr.):900
-
Sistema di raffreddamento: Acqua.
-
Voltaggio di Spunto(KV):22
-
Voltaggio Operativo(KV):16
-


* Potenza in uscita (W) : 40
* Lunghezza D'onda:10600nm
* Lunghezza totale (mm):715
* Diametro (mm) :50
* Peso (Gr.):590
* Sistema di raffreddamento: Acqua.
* Voltaggio di Spunto(KV):22
* Voltaggio Operativo(KV):15
* Assorbimento(mA):18

* Heatsink integrated and connectors included
* High performance, low noise and lost cost
* Low drive heating and low motor heating
* Input: 20 to 50 VDC
* Output: 2.1 to 8.3A (RMS 5.9A)
* Selectable resolutions: 200, 400, 500, 1000, 2000, 4000, 5000, 10000
* DIP switch current options: 2.1A, 2.5A, 2.9A, 3.2A, 3.6A, 4.0A, 4.5A, 4.9A, 5.3A, 5.7A, 6.2A, 6.4A, 6.9A, 7.3A, 7.7A, 8.3A
* Input signal TTL compatible
* Automatic idle-current reduction
* Suitable for 3-phase stepper motors,including 3 lead and 6 lead motors
* Optically isolated differential input signals, pulse frequency up to 300 KHz
* 8 selectable resolutions up to 10000 steps/rev
* DIP switch current setting with 16 different values
* PULSE/DIRECTION & CW/CCW modes optional
* Over-voltage, short-voltage, over-current and short-circuit protection
* Small size for easy mounting
* Dimensions: 4.64 X 2.97 X 1.34 inches; 9.9 oz
* CE certified
18mm ZnSe Lente di messa a fuoco. Adatta per potenze comprese da 20W a 100W.
Diametro: 18mm
Fuoco a: 40mm
Spessore: 2.5mm
Materiale: ZnSe
25mm Mirror - Specchio. Adatto per potenze comprese da 20W a 100W.
Diametro: 25mm
Spessore: 3mm



Alimentatore Bassa Tensione 5V-24V per Drivers Motori e Controllo DSP





Alimentatore Alta Tensione per tubo Co2 laser 40/50W MANUALE